1-3kw Rooftop on Grid/off Grid Wind Turbine, 220V /380V Wind Generator
1).Blades are made of high strength nylon composite materials, high strength, toughness, anti-UV, anti-corrosion, anti-wind, with a good aerodynamic performance and stall protection of the unique characteristics of strong winds. One-time die casting mold, the weight error is small, high efficiency.2).Use imported from Japan NSK Bearings, high efficiency, wear, durable up to 20 years.3).Use bubbles with high temperature line, the high temperature up to 180 ℃...
1).Blades are made of high strength nylon composite materials, high strength, toughness, anti-UV, anti-corrosion, anti-wind, with a good aerodynamic performance and stall protection of the unique characteristics of strong winds. One-time die casting mold, the weight error is small, high efficiency.
2).Use imported from Japan NSK Bearings, high efficiency, wear, durable up to 20 years.
3).Use bubbles with high temperature line, the high temperature up to 180 ℃.
4).Use of Rare earth NdFeB permanent magnet, high efficiency and light weight, low energy consumption, high output power.
5).Unique tail design, automatic alignment direction of the wind, increase the output power, taking into account adjustments and strong wind protection.
Technical specifications and parameters
Rated Power （w）
Star-up wind speed（m/s）
Rated wind speed（m/s）
Number of blades
High-strength nylon composite
Rare earth permanent magnet AC alternator
Carton and foam
Drawing Photo Shows
System Design Service
We cam design different system for customers according their request For example, on-grid or off-grid system , solar wind hybrid system or solar wind diesel generator system like below:
Off grid wind solar hybrid system we can design and custom made all this parts. Which are widely used for some remote place, pastoral area and other places without electricity power.
Grid-tied, on-grid, utility-interactive, grid inverter and grid back feeding are all terms used to describe the same concept–a wind solar system that is connected to the utility power grid.
▶ The wind generator, inner foam protection, outer carton case.
▶ Tower with film package only .
▶ Controller and inverter with inner foam outer carton box.
▶ Package size and weight, please refer to our sales.
▶ Shipping by sea or by air or by express such as DHL, UPS, FEDEX.
Selling Units: Single item
Single wind generator package size: 650×450×325 mm
Single gross weight: 45 KG
Package Type: By carton and foam
If you have any request in package and shipping please tell our sales we will do according to your request.
30% T/T in advance, paid the balance before shipment
|CFR(C&F)||30% T/T in advance, paid the balance against copy of B/L|
|L/C amount above 50,000 USD, we can accept L/C at sight|
|Amount lower than 2000USD|
7~10 working days after receiving payment for one container
Q1: How long of warranty?
A:Normally we have 3 years warranty.
Q2: Can I buy a sample only?
A : Definitely sure, for sample we can give special price
Q3: Do you have nose cone or hub for match the blades？
A：yes we have related RFQ nose cone and hub plate to match different mold
Which mold is suitable for my wind generator?
1) What is your wind turbine rated power
2) Tell me what wind speed in your place?
- Previous: Solar Hybrid Controller Inverter Integrated
- Next: Low RPM Small 300W-600W Wind Turbine Generator for Home, Low Noise Windmill CE&GMC